fbpx

DPA CORE 6066 Omni Headset Microphone, MicroDot

$1,249.00

The DPA CORE 6066 Subminiature Headset Microphone is just three millimetres in diameter – two millimetres smaller than DPA’s existing 4000 series of miniature microphones. Despite its size, it’s exceptionally clear, consistent and highly durable.


✔️ One-size-fits-all, headset fits securely and comfortably
✔️ 2-way adjustable, non-reflective boom with locking system
✔️ Comfortable 3-point gripping system above, below and behind the ear


 


 

SKU: DPA-6066-OC-R-X00 Categories: , Tags: , , ,

The DPA CORE 6066 is an omnidirectional microphone that carries a frequency range of 20 Hz – 20 kHz and has a noise floor of only 26 dB(A).

The d:fine 6066 also benefits from a completely redesigned lightweight, “one size fits all” headset that attaches over the ears for maximum comfort and has a spring mechanism to help it grip below the ears and to the side of the head for added security. With a fully adjustable boom, this new headset is very easy to fit and also has a redesigned cable attachment that allows the cable to run down the wearer’s back, so it can’t be seen.

By combining a tiny capsule design with a strong frame and 3-point ear grips, this headset is the most secure, yet unobtrusive on the market; staying in place even during vigorous performances. Like all DPA microphones, you can trust this headset to perform day in and day out.

Select Colour

Beige, Black, Brown, White

6066 Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB 40 Hz – 20 kHz with 4 dB soft boost at 8 – 20 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 μPa (max. 28 dB(A))
Distortion, THD < 1% 125 dB SPL RMS, 128 dB SPL peak
Dynamic range Typ. 102 dB
Max. SPL, THD 10% 144 dB SPL peak
Rated output impedance From MicroDot: 30 – 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance) Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power ±4 V for full performance. Works from 12V
Connector MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Colour Black, beige & brown
Weight 8 g (0.29 oz) incl. Cable and MicroDot connector
Microphone head size (h x w x d) 3.4 / 14.4 mm (0.13 / 0.57 in)
Capsule diameter 3 mm (0.12 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Reviews

There are no reviews yet.

Be the first to review “DPA CORE 6066 Omni Headset Microphone, MicroDot”

Your email address will not be published.

Accessories

Copyright 2021 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2021 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use