fbpx

DPA 4099 Stereo Mic Kit, Loud SPL with Clips for Accordion

$1,729.00

The DPA CORE 4099 Accordion Microphone is a stereo super-cardioid Microphone solution for accordion representing a revolutionary concept in instrument microphones. Everything about the CORE 4099 Accordion stereo kit has been designed to give you the most natural sound possible.


✔️ CORE by DPA technology inside
✔️ Superior gain-before-feedback
✔️ Flexible and easy mounting system


 

In stock

SKU: DPA-4099-DC-1-101-A Category: Tags: , ,

The DPA CORE 4099 Accordion Microphone kit is the result of DPA’s extensive research and development into creating the ultimate clip on microphone for live accordion performance and studio recordings.

It includes a pair of “Loud SPL” 4099 variation microphones, which have a dynamic range of 108dB and can withstand up to 142dB before clipping. The CORE by DPA amplifier technology assists in the production of a very transparent sound so that even in the unlikely event of spill, there are no unnatural harsh frequencies to deal with.

The capsule contains a highly directional capsule designed for use on stage settings where other instruments and monitoring may be in close proximity. The pick up pattern of the capsule ensures maximum isolation of the accordion, with CORE technology providing low self-noise and high gain before feedback.

The ingenious mounting system is designed to securely attach the gooseneck microphones to each side of the accordion by way of a rubber coated clips.

Specifications

Directional characteristics: Supercardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB
Total harmonic distortion (THD): <1 % up to 131 dB SPL peak
Dynamic range: 108 dB
Max. SPL, peak before clipping: 142 dB
Output impedance: From MicroDot: 30 to 40 ohm, from DAD6001: 100 ohm
Cable drive capability: 300 m (984 ft) with DAD6001
Output balance principle: Signal balanced with DAD6001 XLR adapter
Common Mode Rejection Ratio (CMRR): > 60 dB at 50 Hz to 15 kHz with DAD6001 XLR adapter
Power supply: Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD6001 XLR adapter
Current consumption: 1.5 mA; 3.5 mA with DAD6001 XLR adapter
Connector: MicroDot
Colour: Black
Weight: 33 g (1.16 oz)
Microphone length: 45 mm (1.8 in)
Cable length: 1.8 m (6 ft)
Polarity: Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity: Up to 90 %
Gooseneck, length: 140 mm (5.5 in)

Reviews

There are no reviews yet.

Be the first to review “DPA 4099 Stereo Mic Kit, Loud SPL with Clips for Accordion”

Your email address will not be published. Required fields are marked *

Accessories

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use