fbpx

DPA MICROPHONES CORE 4099 INSTRUMENT MICROPHONE FOR BRASS

$839.00

The DPA CORE 4099 Instrument Microphone for Brass is the next evolution in supercardioid clip-on microphones for trumpet and other brass instruments. Everything about the 4099 has been designed to give you the most natural sound for your studio or live performances.


✔️ CORE by DPA technology inside

✔️ Superior gain-before-feedback

✔️ Flexible and easy mounting system

✔️  Supercardioid Instrument Condenser Microphone


 

 

Available on backorder

SKU: DPA-4099-DC-2-199-T Categories: , Tags: , ,

OVERVIEW

The DPA Microphones CORE 4099 Instrument Microphone for brass is the result of DPA’s extensive research and development into creating the ultimate mic for live acoustic performance and recordings. The CORE 4099 contains a highly directional capsule designed for use in ensembles, pit, stage and orchestral settings. The pick up pattern of the capsule ensures maximum isolation of the musician’s instrument, with incredibly low self-noise and high gain before feedback.

THE CORE 4099 INSTRUMENT MICROPHONE FOR BRASS, EXTREME SPL

The DPA Microphones CORE 4099 Instrument Mic for brass includes the Extreme SPL 4099 variation. This has a dynamic range of 109dB and can withstand up to 152dB before clipping. The CORE, by DPA, is a powerful technology that minimises distortion. In the unlikely event of spill, there are no unnatural, harsh frequencies to deal with. The microphone’s capsule produces a very natural sound, both on and off axis.

In addition, the DPA CORE 4099 microphone for brass can be securely attached to the bell of your brass instrument using a specific rubber coated clamp. 

WHAT’S IN THE BOX?

  • DPA CORE 4099 Microphone x1
  • DAD4099-BC XLR adapter (Requires 48v phantom power and features a low cut built-in) x1
  • DPA 4099 Sax/Trumpet Clip x1
  • Extension Cable, 1.6mm x1

(When coupled with the correct DPA adaptor, the Microphone can also work with a wireless microphone system.)

Specifications

Directional pattern: Supercardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency response: 20 Hz – 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in): 80 Hz – 15 kHz with 2 dB soft boost at 10-12 kHz. Second order low-cut filter at 80 Hz with DAD4099-BC
Sensitivity, nominal, ±3 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))
Distortion, THD < 1%: 134 dB SPL RMS, 137 dB SPL peak
Dynamic range: 109 dB
Max. SPL, peak before clipping: 152 dB
Rated Output impedance: From MicroDot: 30 – 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle: Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Connector: MicroDot
Colour: Black
Microphone diameter: 5.7 mm (0.22 in)
Microphone length: 45 mm (1.8 in)
Cable length: 1.8 m (5.9 ft)
Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Gooseneck length: 140 mm (5.5 in)

Reviews

There are no reviews yet.

Be the first to review “DPA MICROPHONES CORE 4099 INSTRUMENT MICROPHONE FOR BRASS”

Your email address will not be published. Required fields are marked *

Accessories

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use