fbpx

DPA DDK4000 Drum Microphone Kit

$6,889.00

The DPA DDK4000 Drum Microphone Kit

✔️ Natural and precise sound reproduction of the entire kit 

✔️ A clean slate to convey the wanted “mood” to the audience  

✔️ Specific mic placements prevent artefacts, bleed and other shadowing effects 

✔️ Picks up the sound like the drummer hears his kit, thus no or minimum EQ is needed  


 


 

Available on backorder

      
Capture the sublime, honest sound of the drum kit 

The DPA DDK4000 Drum Microphone Kit has a selection of mics for the drum kit, designed specifically to put the sound engineer in control of the sound. By starting with the clear, true sound of the entire kit, the engineer has the best starting point to shape the sound wanted for the situation. These mics guarantee a natural and precise sound reproduction of the entire kit. The specific mic placements prevent artefacts, bleed and other shadowing effects.  

What’s in the box 

The DDK4000 Drum Microphone Kit contains the following mics and accessories:

Microphones 

1 x 2012 Cardioid Microphone 
2 x 2015 Wide Cardioid Microphones (Stereo Pair) 
1 x 4055 Kick Drum Microphone 
3 x 4099 Core Instrument Microphone, Extreme SPL 

Accessories (3 x each of the following)

MicroDot Cable (CM2218B00) 
Drum Microphone Clip (DC4099) 
Adapter for MicroDot to 3-pin XLR (DAD6001)

2012 Compact Cardioid Microphone  

An all-round generalist pencil mic that guarantees excellent results on any instrument on a live stage. It can cope with both high SPLs as well as capture very delicate sounds, so it works well on many different instruments.

  • Durable, reinforced construction 
  • Excellent transient response  
  • Uniform cardioid directionality  
  • Outstanding SPL handling 
  • Natural and precise sound reproduction  

2015 Compact Wide Cardioid Microphone 

A wide cardioid overhead microphone for ambient pick up of a drum kit or other instrument groups. The 2015 can be positioned close to the drum kit (i.e., over the cymbals) and still capture sound evenly across the entire drum kit. This closer position results in stronger signal from the drum kit and therefore less bleed from the stage. 

  • Durable, reinforced construction 
  • Uniform wide cardioid directionality 
  • Spacious sound due to a wide cardioid pick-up pattern  
  • Natural and precise sound reproduction 
  • Compact design for unobtrusive placement on stage 

4055 Kick Drum Microphone 

A flexible, professional mic that captures the power and true sound of the kick drum when placed inside or outside the drum. The 4055 is one of the only kick drum mics that is not sonically pre-tailored to fit a traditional sound in a specific genre. Its low frequency response and dynamics are superb and result in a tight, natural, well-defined sound – the best low-end with detailed mids and highs. 

  • Picks up the clear, true sound of the kick drum 
  • Flat frequency response so you can shape the sound your way 
  • Built tough to withstand rough use on the live stage 
  • Asymmetric physical design for easy placement inside or outside
  •  

4099 Instrument Microphone 

The 4099 perfectly captures the booming sounds of drums and percussive instruments. The mic can be easily positioned to fit diverse types of drums and excel on the snare, toms and hi-hats. The flexible gooseneck can be positioned at different angles to allow a variety of sound nuances. The mic is elegant, lightweight, unobtrusive and designed to stay out of the way during performance. 

  • Handles high SPLs 
  • Superior gain-before-feedback 
  • Flexible and easy mounting 
  • Robust and durable 

Specifications

2012 Compact Cardioid

Directional pattern Cardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in) 40Hz – 20kHz
Sensitivity, nominal, ±2 dB at 1 kHz 8 mV/Pa; -42 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 20 dB(A) re. 20 µPa (max. 22 dB(A))
Distortion, THD < 1% 148 dB SPL (151 dB SPL peak)
Dynamic range Typ. 131 dB
Max. SPL, THD 10% 153 dB SPL (156 dB SPL peak)
Rated output impedance 60 Ω
Minimum load impedance 2 kΩ
Cable drive capability 100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 60 dB
Power supply (for full performance) P48 (Phantom power)
Current consumption 0.7 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Colour Matte black
Weight 83 g (2.9 oz)
Microphone diameter 19 mm (0.75 in)
Microphone length 94 mm (3.7 in)
Maximum output voltage, RMS 8.7 V (21 dBu)
Polarity +V at pin 2 for positive sound pressure
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Sensitivity selection tolerance (at 1 kHz) ±1.5 dB

 

2015 Compact Wide Cardioid

Directional pattern Wide Cardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz – 18 kHz
Sensitivity, nominal, ±2 dB at 1 kHz 12 mV/Pa; -37.7 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Distortion, THD < 1% 147 dB SPL (150 dB SPL peak)
Dynamic range Typ. 132 dB
Max. SPL, THD 10% 150 dB SPL (153 dB SPL peak)
Rated output impedance 60 Ω
Minimum load impedance 2 kΩ
Cable drive capability 100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 60 dB
Power supply (for full performance) P48 (Phantom power)
Current consumption 0.7 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Colour Matte black
Weight 83 g (2.9 oz)
Microphone diameter 19 mm (0.75 in)
Microphone length 94 mm (3.7 in)
Maximum output voltage, RMS 8.7 V (21 dBu)
Polarity +V at pin 2 for positive sound pressure
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Sensitivity selection tolerance (at 1 kHz) ±1.5 dB

 

4055 Kick Drum Microphone

Directional pattern Open Cardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarised condenser
Frequency response 20 Hz – 20 kHz
Frequency range 40 Hz – 18 kHz with a 6 dB soft boost at 10 kHz
Sensitivity, nominal, ±2 dB at 1 kHz 2 mV/Pa; -54 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 27 dB(A) re. 20 µPa (max. 29 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 39 dB (max. 41 dB)
Distortion, THD < 1% 156dB SPL RMS, 159 dB SPL peak
Dynamic range Typ. 132 dB
Max. SPL, THD 10% 164 dB SPL peak
Rated output impedance 380 Ω
Minimum load impedance 2 kΩ
Cable drive capability 100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 55 dB
Power supply (for full performance) P48 (Phantom power)
Current consumption 2.0 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Colour Matte black
Weight 241 g (8.5 oz)
Microphone diameter 57 mm (2.24 in)
Microphone length 132 mm (5.19 in)
Maximum output voltage, RMS > 9.75 V
Polarity +V at pin 2 for positive sound pressure
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

 

4099 CORE Instrument Microphone, Extreme SPL

Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarised condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in) 80 Hz – 15 kHz with 2 dB soft boost at 10-12 kHz. Second order low-cut filter at 80 Hz with DAD4099-BC
Sensitivity, nominal, ±3 dB at 1 kHz 2 mV/Pa; -54 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 28 dB(A) re. 20 µPa (max. 31 dB(A))
   
Distortion, THD < 1% 134 dB SPL RMS, 137 dB SPL peak
Dynamic range Typ. 109 dB
Max. SPL, THD 10% 152 dB SPL peak (label color yellow)
Rated output impedance From MicroDot: 30 – 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V – max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Connector MicroDot
Colour Black
Microphone diameter 5.7 mm (0.22 in)
Microphone length 45 mm (1.8 in)
Cable diameter 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Cable length 1.8 m (5.9 ft)
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Gooseneck length 140 mm (5.5 in)

Reviews

There are no reviews yet.

Be the first to review “DPA DDK4000 Drum Microphone Kit”

Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use