fbpx

DPA CORE 6061 Omni Subminiature Microphone, MicroDot, Loud SPL

$735.00

The DPA CORE 6000 Series Sub-Miniature Microphone is just 3 mm in size. Despite its incredibly small footprint, it maintains the same exceptionally clear, consistent sound & durability of the 4000 series of miniature microphones by DPA.


✔️ Amazing 3 mm CORE capsule technology

✔️ Stainless steel, PVD-coated mic housing

✔️ Modular adapter system fits most professional wireless systems


 

The DPA 6061 CORE Subminiature Microphone is just 3mm (0.12″) in size, but packs the audio power of the larger, award-winning DPA mics. What it lacks in size, it more than makes up for in clarity, consistency and durability. By shrinking CORE, by DPA technology, DPA has ensured you don’t have to compromise on sound to focus on aesthetics.

Shrinking CORE into a 3mm Capsule

CORE, by DPA, is a powerful new technology at the heart of these subminiature microphones. Essentially, CORE minimises distortion and expands dynamic range significantly. 

Minimised distortion

From a whisper to a scream, you will experience increased clarity and openness.

Taking the amazing CORE technology and shrinking it down to fit into a (0.12″) subminiature mic, means that, despite their small size, the performance of the 6060 CORE Subminiature Series is fully comparable to the globally loved and recognised 5mm (0.20″) miniature capsules. They have a lower noise floor than any other 3mm (0.12″) capsule on the market. In addition to this, they are better able to capture high sound pressure levels without distortion. In terms of technical specifications, the 6061 has a noise floor of only 26dB(A), which is on par with the 5mm (0.20″) DPA miniature capsules.

Advanced new mic design

The DPA 6061 CORE Subminiature’s tiny capsule has a cap that can be removed for cleaning and reattached with a firm click. The supplied cap corresponds in its nature to the low-boost grid of the 5mm (0.20″) versions. Both the mic itself, and the cap, are made of stainless steel and treated with a Physical Vapour Deposition (PVD) coating that makes it extremely durable. Therefore, it can tolerate high temperatures, is resilient against impacts and resistant to abrasion. Futhermore, this pleasant matte coating makes the entire headset look smaller and less obtrusive.

Quality Cables

Until now, cables were often the weak point on these types of mics. However, these subminiatures have the same size cable [Ø 1.6mm (0.06″)] and the same rugged cable relief as the 5mm (0.20″) mics. Thanks to the Kevlar inner core, the cable is extremely durable, does not become entangled and can withstand rough pulls. The mic housing also has a strain relief which strengthens the assembly.

The cable and capsule design ensure immunity to noisy wireless devices. These mics are typically connected to a wireless belt pack and offer a comprehensive mix of adapters to suit the many wireless transmitters available. When used with an adapter, the connector is MicroDot as standard, but is also available as a hardwired termination to suit the most popular systems from manufacturers such as, Shure and Sennheiser. All DPA connectors are equipped with a rugged strain relief.

The CORE Subminiatures are the only 3mm (0.12″) mics that give you the DPA sonic quality that you know and love.

Learn more about CORE by DPA technology.

IP58 certified

The CORE Subminiatures are IP58 certified. This durability is achieved through several defence mechanisms:

1.    Water-repellent nano-coating of the cover and housing
2.    Hermetic sealing of the sensitive amplifier at the core of the mic
3.    Dual gold plating of the diaphragm

See also DPA 6060

Select Colour

Beige, Black, Brown, White

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB 40 Hz – 20 kHz with 4 dB soft boost at 8 – 20 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 μPa (max. 28 dB(A))
Distortion, THD < 1% 125 dB SPL RMS, 128 dB SPL peak
Dynamic range Typ. 102 dB
Max. SPL, THD 10% 144 dB SPL peak
Rated output impedance From MicroDot: 30 – 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance) Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power ±4 V for full performance. Works from 12V
Connector MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Colour Black or beige
Weight 8 g (0.29 oz) incl. Cable and MicroDot connector
Microphone head size (h x w x d) 3.4 / 14.4 mm (0.13 / 0.57 in)
Capsule diameter 3 mm (0.12 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Reviews

There are no reviews yet.

Be the first to review “DPA CORE 6061 Omni Subminiature Microphone, MicroDot, Loud SPL”

Your email address will not be published. Required fields are marked *

Accessories

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use