fbpx

PMC Loud Speakers PMC8-2 Active Studio Monitors, Pair

$22,999.00

The PMC8-2 three-way active studio monitor is designed to provide critical reference monitoring for the most demanding applications.


 

Available to order

SKU: PMC-8-2 Category: Tags: , , , ,

As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.

The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.

Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.

PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.

Specifications

Type Active 3-way nearfield reference monitor with ATL™ bass loading
Drive Unit Complement LF 2 x PMC 200mm (8”) studio 8 drivers

MF PMC 55mm (2”) soft dome mid-range

HF PMC 27mm (1”) soft dome tweeter

 

Effective ATL™ Length 3m (9.8ft)
Frequency Response 25Hz – 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity +4dBu input signal = 98dB SPL @ 1m
Max continuous SPL 113dB @1m

(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL 125dB @1m

(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Directivity

 

H +/-45 degrees

V +/-50 degrees (-6dB off axis @10kHz)

 

Input XLR switchable between analogue & digital AES3

Analogue input

– +20/+24dBu max. input level (selectable)

– 22K ohm input impedance

Digital input

– 16/24-bit AES3 signal, left, right or left + right

– 18 – 192kHz Sample Rate

– 110 ohm input impedance

Expansion card slot

– For future connectivity upgrades

 

Output XLR digital AES3 (fixed 24-bit @ 96kHz)
Network

 

RJ45 for use with PMC SoundAlign web interface
Features Level Trim (+/-10dB)

High-pass filter (20 – 200Hz, 12dB/Oct)

Delay (0 – 30mS)

Phase (normal or inverted)

LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)

Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)

User presets (3 + factory defaults)

 

Latency 2.4mS
Amplifier power per channel LF 2 x 400Wrms

MF 1 x 400Wrms

HF 1 x 400Wrms

Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle) 50W
Power consumption (max) 1500W
Cabinet dimensions

 

H 534mm (21”)

W 551mm (21.7”)

D 440mm (17.3”)

Weight 39kg (86lbs) each
Available Finishes Studio black

Downloads

Reviews

There are no reviews yet.

Be the first to review “PMC Loud Speakers PMC8-2 Active Studio Monitors, Pair”

Your email address will not be published.

Copyright 2021 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2021 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use