fbpx

DPA MICROPHONES 4660 HEAVY DUTY OMNI MIC, NORMAL SPL

$775.00

The DPA CORE 4660 (Normal SPL) Omnidirectional Heavy Duty Lavalier Microphone is small, yet exceptionally strong, offering an extremely accurate omnidirectional pattern in a rugged housing for the toughest of conditions.


✔️ Exceptional audio quality

✔️ Uniform, consistent sound between DPA mics

✔️ Extremely rugged and reliable


 

 

DPA CORE 4660 SERIES

The DPA Lavalier series is the world’s leading microphone for speech and vocal performance and has become the industry standard microphone in live theatre and broadcast. Now in its next evolution, the CORE 4060 series of Miniature Omnidirectional Microphones brings extra clarity and detail to live speech and vocals, further distancing themselves from their competitors.

4660 CORE HEAVY DUTY OMNI MIC

DPA Microphones developed the 4660 Omnidirectional Lavalier Microphone to withstand the very toughest conditions in live performance. It contains a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm, all mounted in a stainless steel housing.

The DPA CORE 4660 Omnidirectional Lavalier Microphone is an omnidirectional microphone with sensitivity at all angles – which means it’s capable of picking up sound equally from all directions.

The microphone features a double vent protection system that significantly enhances its resistance to humidity and sweat. Its Kevlar-reinforced cable relief enables it to withstand the constant twists, bends, and pulls of any live performance.
Furthermore, the microphone easily configures to operate with a broad range of the industry’s preferred wireless systems, providing additional flexibility. Alternatively, if you prefer a wired system, the mic is available with an XLR adapter.

All CORE by DPA Microphones are now IP58 Rated for water and dust ingress.

Select Colour

Beige, Black

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
Distortion, THD < 1% – Legacy 120 dB SPL RMS, 123 dB SPL peak
Dynamic range Typ. 100 dB
Max. SPL, THD 10% 134 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V – max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector MicroDot
Colour Black or beige
Weight 13 g (0.46 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 17.6 mm (0.7 in)
Cable length 1.8 m (5.9 ft)
Cable colour Black or beige
Cable diameter 2.2 mm (0.09 in)
Polarity Positively increasing sound pressure produces positive-going voltage at MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)

Reviews

There are no reviews yet.

Be the first to review “DPA MICROPHONES 4660 HEAVY DUTY OMNI MIC, NORMAL SPL”

Your email address will not be published. Required fields are marked *

Accessories

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use