fbpx

DPA MICROPHONES 4266 CORE OMNI FLEX HEADSET MIC

$1,135.00

The DPA 4266 CORE Omni Flex Headset makes use of all of DPA’s vast experience in microphone design and manufacturing, providing the best sounding omnidirectional head-worn microphone available today.


✔️ Lightweight and flexible

✔️ Resistant to humidity

✔️ Flexible adapter system fits most professional wireless systems



 

The 4266 CORE Omnidirectional Headset Microphone combines the legendary sound of the 4066 Omnidirectional Capsule with a lightweight and flexible headset system. This condenser headset mic is easy and fast to adjust and it offers clean and transparent sound quality with lots of headroom. The capsule itself is the same type as the 4066, but is attached to an interchangeable boom arm.

CLEAR, ACCURATE & NATURAL SOUND

Like all of the microphones in the range, the 4266 Omnidirectional Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities. Users can both speak and sing into the mic with no hint of distortion.

Two boom lengths are available to accommodate different applications and head sizes: 90 mm (3.5 in) and 110 mm (4.3 in). The 110 mm (4.3 in) is the standard choice for most users.

IP58 CERTIFIED

All CORE by DPA technology microphones are IP58 certified. This durability is achieved through a number of defense mechanisms:

1.  Water-repellant nano-coating of the cover and housing
2.  Hermetic sealing of the sensitive amplifier at the core of the mic
3.  Dual gold plating of the diaphragm

A BIT ABOUT OMNIS

An omnidirectional microphone has sensitivity at all angles – in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live situations.

Nonetheless, it is recommend that you try a DPA omni first because, when used close to the sound source, the equal frequency response makes these mics a flexible addition in your audio toolbox. It will often give a more natural sound, it can handle extremely high sound pressure levels, it does not suffer from proximity effect and is not as sensitive to wind, pop or handling noise.

ADAPTER SYSTEM GIVES YOU FLEXIBILITY

The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a completely new microphone. When you make the switch, you won’t hear any loss or change in sound quality.

DPA’s miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Select Colour

Beige, Black, Brown

Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB Soft boost grid: 40 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 40 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
Distortion, THD < 1% – Legacy 120 dB SPL RMS, 123 dB SPL peak
Distortion, THD < 1% – CORE 134 dB SPL RMS, 137 dB SPL peak
Dynamic range – Legacy Typ. 97 dB
Dynamic range – CORE Typ. 111 dB
Max. SPL, THD 10% 144 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance)

For wireless systems: Min. 5 V – max. 10 V through DPA adapter

With DAD6001-BC: P48 (Phantom Power). Will work from 12 V

Connector MicroDot
Colour Black, beige or brown
Weight Single Ear: 10 g (0.35 oz)
Microphone diameter/Microphone length 5.4 mm (0.21 in)/12.7 mm (0.5 in)
Cable length 1.3 m (4.3 ft)
Cable diameter 1.6 mm (0.06 in)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Reviews

There are no reviews yet.

Be the first to review “DPA MICROPHONES 4266 CORE OMNI FLEX HEADSET MIC”

Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use