The DPA CORE 4060 (Normal SPL) Omnidirectional Lavalier Microphone is small, yet exceptionally strong, offering an extremely accurate omnidirectional pattern in a rugged housing for the toughest of conditions.

✔️ Exceptional audio quality

✔️ Uniform, consistent sound between DPA mics

✔️ Extremely rugged and reliable



Available on backorder

The DPA Microphones 4060 CORE Instrument Microphone Kit is designed to use as a close-miking solution for a wide variety of musical instruments.

This mic offers a very clean, detailed and natural sound quality. This leaves it up to the user to decide on the correct placement to achieve the desired timbre.

The kit is perfect for studio use or amplification for live use.

4060 Miniature Omnidirectional Microphone, Normal SPL

The DPA CORE 4060 Omni microphone is small in size, but mighty in flexibility. The 4060’s miniature size enables an exceptionally accurate omnidirectional pattern. You therefore, do not need to aim it directly at the sound source to achieve quality pickup. The omnidirectional pattern also makes it less sensitive to handling noise, as well as pop and wind noise. This microphone handles sound pressure levels of up to 134dB before clipping occurs.

Diversity in Applications

The DPA 4060 microphone allows for a diverse range of applications. Originally designed for use with wireless systems in theatres, it is also now one of the most loved microphones for film and television applications. Ideal for capturing speech in all of its nuances, it is also suitable for close-miking a wide range of instruments. For applications where the sound source is more remote or dampened and you need to have a good balance of signal to noise ratio, the 4060 is the perfect solution.


4060 x1

Adapter for XLR x1

Double Holder x1

Surface Mount x1

Magnet Mount x1

Holder for Strings x2

Foam Windscreen x5

4060 Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
Distortion, THD < 1% – Legacy 120 dB SPL RMS, 123 dB SPL peak
Distortion, THD < 1% – CORE 126 dB SPL RMS, 129 dB SPL peak
Dynamic range – Legacy Typ. 100 dB
Dynamic range – CORE Typ. 106 dB
Max. SPL, THD 10% 134 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector MicroDot
Colour Black, beige, brown or white
Weight 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 12.7 mm (0.5 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%


There are no reviews yet.


Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use