fbpx

DPA MICROPHONES 4071 ENG/EFP MICROPHONE KIT

$1,140.00

The DPA 4071 Omnidirectional Lavalier Microphone is similar to the CORE 4660 Miniature Omnidirectional Microphone, but its sensitivity has been adjusted to accommodate higher sound pressure levels (SPLs) and includes an acoustically created boost in the higher frequencies, ideal for less than favourable placement positions. All packed into a rugged housing for the toughest of conditions.


✔️ Exceptional audio quality

✔️ Uniform, consistent sound between DPA mics

✔️ Extremely rugged and reliable


 

 

Available on backorder

The DPA Microphones 4071 ENG/EFP Microphone Kit is configured to include the mic and accessories necessary for electronic news gathering and electronic field production.

4071 Miniature Omnidirectional Microphone, Presence Boost

The DPA Microphones 4071 Miniature Omnidirectional Microphone is a fantastic lavalier mic, which features a soft boost typically of 5dB at 4 to 6kHz. This is critical for a chest-placed microphone because the frequency range of the consonants spoken is dampened in this position, which results in poor intelligibility. The 4071 has a boost that maximises speech intelligibility. This microphone will be able to handle sound pressure levels up to 144 dB before clipping occurs.

When recording voices from mic placement on a performer’s body, no frequency below 100 Hz is attractive.
To enhance headroom, the 4071 capsule includes a 100 Hz acoustical low-cut, benefitting the built-in preamplifier and wireless system. Furthermore, the low-cut filter removes low-frequency rumble, noise and proximity effect.

Because of its special optimisation for speech, this mic is especially appropriate for ENG news crews since very few ENG mixers have the ability to make this type of compensation. It is also a fantastic choice for in-studio reporters or even hidden under clothing for film production use.

WHAT’S IN THE BOX?

4071 x1

Adapter for XLR x1

Double Holder x1

Foam Windscreens Colour Mix x1

Fur Windscreen x1

Miniature Mesh x1

Holder x1

4071 Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB 100 Hz – 15 kHz with typ. 5 dB soft boost at 4 – 6 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
Distortion, THD < 1% 134 dB SPL RMS, 137 dB SPL peak
Dynamic range Typ. 97 dB
Max. SPL, THD 10% 144 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V – max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector MicroDot
Colour Black
Weight 14 g (0.5 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 17.6 mm (0.7 in)
Cable length 1.8 m (5.9 ft)
Cable colour Black
Cable diameter 2.2 mm (0.09 in)
Polarity Positively increasing sound pressure produces positive-going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Reviews

There are no reviews yet.

Be the first to review “DPA MICROPHONES 4071 ENG/EFP MICROPHONE KIT”

Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use