The DPA CORE 4063 microphone is small in size (5mm), but mighty in flexibility. Due to its miniature size, it exhibits an exceptionally accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup.

✔️ Extremely rugged and reliable ✔️ Diminutive size made for flexible and easy concealment ✔️ Modular adapter system fits most professional wireless systems



The DPA Microphones 4063 CORE Omnidirectional Microphone, Loud SPL and Low voltage is designed for use with transmitters giving only 3V bias voltage. Some transmitters provide only 3V instead of the more common 5V. In this case, the 4063 is the right choice for such transmitters.

The mic is acoustically identical to the 4060 Miniature Omnidirectional Microphone, but its internal preamplifier in the input stage is designed for working with lower supply voltage. With the correct power source, the microphone will be able to handle sound pressure levels up to 138 dB before clipping occurs.

This mic is available in three colours: black, beige and white.

Diversity in Applications

The DPA 4063 Miniature allows for a diverse range of applications. Designed for use with wireless systems in theatres, it is also now one of the most loved microphones for film and television applications. Ideal for capturing speech in all of its nuances, it is also suitable for close-miking a wide range of instruments. For applications where the sound source is more remote or dampened and you need to have a good balance of signal to noise ratio, the 4063 is the perfect solution.

Interchangeable Grids

By selecting the correct grid for your application, it is possible to modify the acoustic response of the 4060 Series.

Included with each microphone are two grids. The pre-fitted Soft Boost Grid gives a 3dB soft boost at 8-20kHz. It is recommended to be used when the microphone is mounted on the performer’s head, and in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10dB soft boost at around 12kHz for applications where chest-placement is preferred, and including under-clothing applications. Both of these grids are made of anodised stainless steel, giving a tough and scratch resistant surface. You can detach the grids from the microphone and clean them of sweat, makeup, etc.

Select Colour

Beige, Black, White


Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
Distortion, THD < 1% – Legacy 120 dB SPL RMS, 123 dB SPL peak
Distortion, THD < 1% – CORE 132 dB SPL RMS, 135 dB SPL peak
Dynamic range – Legacy Typ. 97 dB
Dynamic range – CORE Typ. 109 dB
Max. SPL, THD 10% 138 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 3 V – max. 10 V
Connector MicroDot
Colour Black, beige, or white
Weight 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 12.7 mm (0.5 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%


There are no reviews yet.


Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio Pty Ltd. All rights reserved. | Privacy Policy | Terms of Use